Measurement Computing adds three new members
to its low-cost USB datalogger family
NORTON, Mass.—March 12,
2007—Measurement Computing Corporation, the market leader in low-cost data
acquisition, today announced the addition of three new battery powered specialty
loggers to its growing USB product line. The three data loggers are:
·
USB-503—a 0–30 VDC
voltage logger—AU$150.00
·
USB-504—a 4–20 mA
current loop logger—AU$150.00
·
USB-501-LT—ultra small
(lite) version of the USB-501 temperature logger—AU$100.00
These products are the
perfect, cost-effective solution for both long- or short-term data logging
applications. They offer reduced setup time and eliminate the need to drag
around expensive equipment to make field or factory measurements. The 500 series
provides a low-cost and simple interface to configure, download, display, and
export logged data. The growing USB-500 series units may be the most convenient,
easy-to-use dataloggers on the market.
Bill Kennedy, MCC’s Vice
President of Sales and Marketing, commented, “Customers who already own our
USB-501 and USB-502 temperature loggers really appreciate their size, price, and
ease of use, and have asked if we could extend the line to include loggers for
other types of data, and that’s exactly what we’ve done. We have one for
voltage, one for current, plus, a new ‘lite’ temperature logger that looks like
a USB flash drive.”
The USB-503 logs up
to 32,510 voltage measurements over a 0 to 30 VDC range. The USB-504 logs
up to 32,000 current loop measurements in the 4–20 mA range. Both the 503 and
the 504 have eight programmable logging rates—from once every ten seconds to
once every twelve hours. Flashing LEDs indicate logger status.
The tiny USB-501-LT
logs up to 4,080 temperature measurements in the -10 to 50 °C range and operates
at fixed 15-minute, 30-minute, 1-hour, and 2-hour sample rates. Status is
indicated by a red/green LED. All the loggers plug directly into a standard USB
port for setup and data download.
The USB-500 Series Data Logging
Application software (included with each logger) supports all products in the
series. This user-friendly application is used initially to configure the
loggers—program alarm thresholds, logging rates, start times, measurement units,
etc. When the loggers are retrieved from the field, the same application
provides simple one-click access to download, display, and export the data.
Click below to see a photo of the USB-503, 504, and 501-LT
http://www.measurementcomputing.com/pr/usb-503-504-501-LT.html
Please note that the prices quoted are exclusive of GST and local delivery fees
and that these prices are subject to change with out notice in line with both
MCC and Firetail Daq policy.
For More Information Contact:
Roger Cawsey
Firetail DAQ
16 Dover St Oakleigh East Vic 3166
Tel: 03 9017 0464
Fax: 03 9544 3867
Email:
info@firetaildaq.com.au
| 
